Replacement Airbags For your Vehicle

Airbag Light On | Reset Your Airbag light

How to reset and repair your airbag light.

May
16

Peugeot 406 LX 1999 set time and date/airbag light flashing? Any Ideas?

Posted by admin
Replacement Airbags For your Vehicle

Going to find a Haynes manual at the weekend (hopefully) but anyone got any idea how to set the time and date on the panel in Peugeot 406LX? Plus the AIRBAG light flashes any ideas what is causing this – as far as i know there has been no crashes etc x Thanks in advance

Airbag light flashes to tell you that the airbag system is inoperative due to a fault. The fault can be diagnosed with a computer connected to the data link socket. Once fixed the same device can be used to cancel the flashing light – no other way to cancel this on a 406. The Haynes manual may help you go through the airbag system but without the link to a computer you will not know whether you have fixed it
Sorry no idea about the clock

  1. Timbo is here Said,

    Airbag light flashes to tell you that the airbag system is inoperative due to a fault. The fault can be diagnosed with a computer connected to the data link socket. Once fixed the same device can be used to cancel the flashing light – no other way to cancel this on a 406. The Haynes manual may help you go through the airbag system but without the link to a computer you will not know whether you have fixed it
    Sorry no idea about the clock
    References :

  2. alec Said,

    Found this on a forum for the airbag light.

    It’s most likely the pre-tensioner connectors under one of the front seats. Look under the front edge and you should see some orange cable with a connector. Plug the connector in and out (ignition off!) a few times – this should put the light out.

    Make sure that the ignition is off when you do this !!!!!!!!!!!!!!!!!!!!!!

    Found this answer about the time and date on an old yahoo answers search. It was voted best answer.

    try this:
    Hold down the LEFT button next to the multi-function display for a couple of seconds. The display should now start flashing. Press the Left button briefly to scroll through the display options and the RIGHT button to change the currently flashing item.
    References :

Add A Comment

Easy AdSense by Unreal