Airbag Light On | Reset Your Airbag light » airbag light

Can a car pass a NYS inspection with an airbag light on?

admin — Mon, 08 Mar 2010 04:45:34 +0000

I have had a 2000 VW Cabrio off the road for a year. The airbag light came on after having changed the battery this morning. Will this cause my car to fail NYS inspection?

This is a safety inspection – the air bag light has signaled a faulty safety system in your vehicle.
Connect the dots?

why does my airbag light keep blinking?

admin — Sun, 14 Feb 2010 03:17:45 +0000

i have a 1995 Mercury Sable station wagon. the airbag light on the dashboard panel keeps blinking in a 1-3 pattern. is this a code that means something is wrong?

Yes, you have a problem in your airbag system and it has been disabled. The 1 – 3 pattern is trouble code 13. You need to take your vehicle to your dealer IMMEDIATELY. NOT YOUR MECHANIC, YOUR DEALER. Please do not attempt to diagnose or repair the problem yourself. I cannot believe that some of the people answering this question is telling you not to worry about it. That airbag is designed to help you from receiving massive head and face injuries when involved in a accident. Only a damn fool would ignore this problem.

FYI : there was a recall on that model year vehicle for the Airbag Deactivation Switch, The TSB number and issue date is 98S20 August 1998.

2005 Ford Five Hundred Limited Passenger side airbag light?

admin — Sun, 24 Jan 2010 11:30:39 +0000

I have just bought a used Ford 500 and whenever the passenger gets out , a light on the dash lights saying that the passenger side airbag is off lights for 1-2 seconds. Is this abnormal? Does it mean the airbag is always off? Is there a way to turn it off and on?
Thanks! That answers that! You guys rock!

Yes its normal because the passengers seat sensor sends a signal back to the BCM and SRS system telling it that they have left the seat……..

No you cannot turn it off and on at all……..

How to use this site to solve your airbag light problem.

admin — Mon, 11 Jan 2010 14:27:59 +0000

Introduction

Airbaglighton.com is a collaboration of people who are experiencing problems with there airbag light and technicians who can help solve them.

To focus on a solution use these guidelines:

Use the search feature on right, and type your cars make and model. (i.e, honda accord)
After each article there are comments posted. Click on the “comments“ link to read ideas and examples others have used to solve a similiar problem.
There are many links spread through out the site of companies who can help you. If you feel you need additional support select the text or banner ads to receive help.
You can also select one of the categories if your “airbag light is flashing” or “airbag light in on.”

Thanks, for visiting our site and we hope it helps solve your airbag light problem.

Technorati Tags: airbag light, airbag light on

the airbag light stays on after start up, and then beeps twice?

admin — Mon, 28 Dec 2009 00:24:23 +0000

the airbag light stays on after start up, and then beeps twice, then stays on permenantly,

If it beeps twice, that is looking like a code 2 or 11, but I don’t think it’s 11. Google code 2 for your vehicles airbag system and see what it means. I know that the lower number the code is the more serious it is. The higher codes like a code 53 would be less serious. I know a code 2 on an older Ford Taurus (I had one) means all primary crash detectors have been disconnected.

How can I reset my 1999 Hundai accent coupe AIRBAG Light?

admin — Fri, 25 Dec 2009 09:11:32 +0000

I was trying to installed a new radio/stereo in my hundai.In the process of installing the stereo/radio the yellow wire touch the metal part of the car where the radio/stereo goes in and a spark went off.The radio was not install but the airbag light still on.

It usually works if you disconnect the positive cable from the battery for a couple seconds.

how can i turn the airbag light on 01 cavalier?

admin — Tue, 22 Dec 2009 07:37:20 +0000

i got the car without airbags but i am planing to put a set in there myself.are there any tricks to make sure i don’t mess up anything?and how can i get rid off the airbag lights on the dash once i install the airbags?

Questions like this are asked and answered all the time here. There are specific items that are required to remove or replace airbags. Check out this website for the EXACT answers to your questions. This site tells you exactly what needs to be removed and replaced (seat belts & all) on over 3500 cars. It’s a pay site, but it’s little money well spent to get the correct answers and to see exactly what you’re after…it uses pictures, not text, so you can see what you’re looking for.
http://www.airbagsolutions.com
http://www.airbagsolutions.com/vehicles_list.aspx
http://www.airbagsolutions.com/demo.aspx
Good Luck…it’s not too bad of a job & if your state allows it, used parts or parts from ebay should be ok

why is my airbag light staying on all the time in my car?

admin — Sat, 19 Dec 2009 13:15:34 +0000

i have a renault megane coupe and ever since i bought the car in september the airbag light is on all the time . as soon as you start the engine un till you switch it off again. can anyone help.

it is usually a problem witht the connector under the front seats. make sure that they are plugged in properly, have a fiddle with them moving them around. this is a common problem with cars, the lights should go off. it happens when the seats are moved or they get knocked.

After replacing my wiperswitch on my honda accord the airbag light came on

admin — Thu, 17 Dec 2009 02:52:41 +0000

I recently replaced my wiper switch on my Honda Accord. While pulling the steering off, two pieces of plastic fall off the reel opened. Since then the sensor light has been on. Does anybody know how to fix the airbag?

at worst you’ll have to replace the cable reel.

it may be a false light however if you opened the harness connector.

clear the code using this procedure
The self-diagnostic function of the SRS system allows it to locate the causes of system problems and to store this information
in memory. For easier troubleshooting, this data can be retrieved via a data link circuit.
When you turn the ignition switch ON (II), the SRS indicator will come on. If it goes off after six seconds, the system is
normal.
If there is an abnormality, the system locates and defines the problem, stores this information in memory, and turns
the SRS indicator light on. The data will remain in the memory even when the ignition switch is turned off or if the battery
is disconnected.
When you connect the SCS service connector to the service check connector (2P), and turn the ignition switch ON (II),
the SRS indicator light will indicate the diagnostic trouble code (DTC) by the number of blinks.
After reading and recording the DTC, proceed with the troubleshooting for this code.

if it doesn’t clear, leave the jumper wire in and get the ‘blink code’. if its for the cable reel, then you’ll have to replace it.

How can i reset airbag light?

admin — Mon, 14 Dec 2009 10:17:17 +0000

How can i reset airbag light (to clear) on 2000 Infiniti G20?
But my air bags deployed already so no worries about explosion.

The light will reset it self when the problem is fixed

Technorati Tags: airbag light, airbag light flashing, airbag light on