Replacement Airbags For your Vehicle

Airbag Light On | Reset Your Airbag light

How to reset and repair your airbag light.

Mar
05

Warranty for airbag on 98 Civic?

Posted by admin
Replacement Airbags For your Vehicle

My srs light is on my civic and shop says air bag won’t deply; I get to bring it to the dealer. I heard there is a lifetime warrantly on airbag service. Is that right?

It’s your civic duty to ask this in the proper section 🙂

I think it might be btw.

EDIT: Maybe not the more I looked into it, but I did find this. Do at your own risk, the dealer will charge around $80 to do it from what I read.

"To reset the SRS light follow these steps:
1. turn ignition switch off, remove ECU service connector
2. connect (jump) the MES connector (this is 2 pin yellow connector wrapped in yellow plugged in the front of the underdash fuse box)
3. turn ignition switch on
4. SRS light will come on for 6 secs then go out, remove the jumper within 4 secs after the light goes out.
5. the SRS light will come on again, reconnect the jumper within 4 secs after the light has come on.
6. the SRS light will go off, remove the jumper with in 4 secs after the light has gone off.
7. the SRS light will blink two times indicating the memory is reset. "

  1. ThomasS Said,

    It’s your civic duty to ask this in the proper section 🙂

    I think it might be btw.

    EDIT: Maybe not the more I looked into it, but I did find this. Do at your own risk, the dealer will charge around $80 to do it from what I read.

    "To reset the SRS light follow these steps:
    1. turn ignition switch off, remove ECU service connector
    2. connect (jump) the MES connector (this is 2 pin yellow connector wrapped in yellow plugged in the front of the underdash fuse box)
    3. turn ignition switch on
    4. SRS light will come on for 6 secs then go out, remove the jumper within 4 secs after the light goes out.
    5. the SRS light will come on again, reconnect the jumper within 4 secs after the light has come on.
    6. the SRS light will go off, remove the jumper with in 4 secs after the light has gone off.
    7. the SRS light will blink two times indicating the memory is reset. "
    References :

Add A Comment

Easy AdSense by Unreal